JATO 4X4 VXL 4S, Traxxas #90386-4
RECOMMENDED: Battery & Charger Completer
4S LiPo Completer
MAP $189.95
Order TRA2996X
MODEL 90386-4: Jato® 4X4 VXL: 1/8 scale 4X4 brushless buggy, Ready-To-Race® with factory-installed Extreme HD kit, waterproof electronics, with TQi™ 2.4 GHz 2-channel radio system, VXL-4s™ speed control, Velineon 540XL brushless motor, and clipless painted body. Requires: battery and charger.
What’s In The Box:
- Jato 4X4 with VXL-4s ESC and 540XL motor
- Quick Start Guide
- TQi 2.4 GHz radio system
- High quality maintenance tools
What You’ll Need:
- Batteries
Jato 4X4 VXL requires a 2, 3, or 4-cell LiPo battery
- Charger
Traxxas EZ-Peak® Live charger (2971) is recommended for easy and fast charging performance.
- AA Alkaline Batteries
Four AA alkaline batteries for the transmitter.
RECOMMENDED Battery & Charger Completer Pack
Jato 4X4 VXL
2996X
4s LiPo with EZ Peak iD Charger
UPC 020334299697
$189.95 MAP
- Clipless Body
- Holds tight for intense action
- Quick and easy removal
- High-downforce wing
- Extreme Heavy Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Heavy duty one-piece camber & toe links
- Maxx-duty driveshafts
- Oversize diameter
- 6 mm axles
- 17 mm hex hubs
- Aluminum wheel nuts
- TQi™ 2.4 GHz High-Output Radio System
- TQi 2-channel transmitter
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Programmable multi-function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- 5-channel micro receiver (6533) with fail-safe security
- Patented waterproof receiver box with easy-access plug
- VXL-4s™ Waterproof Electronic Speed Control
- 2s–4s LiPo compatible
- Real-time telemetry via Traxxas Link™
- Selectable 7.4-volt high-voltage BEC
- Large Heat sink accepts accessory cooling fan (3340
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode™ - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set® one-button setup
- 12 gauge wire
- Integrated protection circuits
- LED status lights
- Velineon® 540XL Brushless Motor
- Long format brushless motor
- 4-pole 2400 Kv
- 5 mm output shaft
- Low-maintenance design
- Chassis
- Aluminum T-Bar chassis stiffener
- Modular composite tub design
- Secure battery hold-down latch
- Low-CG design
- High-clearance skid plate
- Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
- Suspension
- Heavy duty shock towers
- Reinforced shock mounts
- Double-shear camber link connections
- Heavy duty suspension arms
- Aluminum oil-filled GTR shocks
- Threaded shock collars for precise ride height adjustment
- Large oil capacity for consistent damping
- White powder-coated springs
- Driveline
- Full-time shaft-driven 4-wheel drive
- Torque-Biasing Center Drive
- Sealed steel gear front and rear differentials
- Steel 32-pitch gears
- Wheels and Tires
- 3″ dish wheels
- S1-compound Response Pro tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
MODEL SPECS
| Model Type: |
1/8 scale buggy |
| Skill Level: |
2 |
| Length: |
20.4 inches (517 mm) |
| Width: |
12 inches (305 mm) |
| Height: |
7 inches (179 mm) |
| Weight: |
5.6 pounds (2.54 kg) |
| Wheelbase: |
12.6 inches (320 mm) |
| Front Track: |
12 inches (305 mm) |
| Rear Track: |
12 inches (305 mm) |
| Shock Length (front): |
3.98 inches (101 mm) - XX-long |
| Shock Length (rear): |
3.98 inches (101 mm) - XX-long |
| Differential Type: |
Hardened steel bevel, sealed, limited slip |
| Gear Pitch: |
32 |
| Overall Drive Ratio: |
10.16:1 |
| Drive System: |
Shaft-driven 4WD with Torque-Biasing Center Drive |
| Steering: |
Dual-bellcrank with integrated servo saver |
| Chassis Structure/Material: |
Composite tub |
| Tires: |
Response Pro S1-compound with foam inserts |
| Wheels (front/rear): |
3″ dished buggy wheels |
| Wheel Diameter: |
3″ inches (78 mm) |
| Radio System: |
TQi™ 2.4 GHz (2-channel) |
| Servo: |
Waterproof digital 2075 servo (125 oz-in torque) |
| 165 mm x 50 mm x 35mm: |
Battery Compartment (L/W/H) |
MOTOR SPECS
| Motor Type: |
540XL 2400 Kv sensorless brushless |
| Weight: |
11.18 ounces (317 g) |
| Length: |
3.58 inches (91 mm) |
| Diameter: |
1.41 inches (36 mm) |
| Shaft Size: |
5 mm |
| Connector Type: |
Traxxas 6.5 mm bullet connectors |
ESC SPECS
| Input Voltage (cells): |
2s-4s LiPo (7.4 V - 16.8 V) |
| Case Size: |
2.40″ (61 mm) x 2.09″ (53 mm) x 1.42″ (36 mm) |
| Weight: |
4.20 ounces (119 g) |
| BEC Voltage: |
Selectable 6.0 or 7.4 volts |
| Motor Connectors: |
Traxxas 6.5 mm bullet connectors |
| Battery Connectors: |
Traxxas High-Current Connectors |
| Thermal Protection: |
Two-stage thermal shutdown |
| Ports: |
RX input, auxiliary fan connector |